Top

Home page > Scientific and technical activities > Accelerator technology & physics > High power superconducting linacs > SPIRAL-2 @GANIL > Beam dynamics, general design

Beam dynamics, general design

The Accelerator Department of IPN Orsay has been one of the main partners in the design of the SPIRAL2 accelerator since the very early studies (APS, APD). During the construction phase, IPN Orsay was indeed in charge of the general coordination of the project accelerator team (2005-2010).
hebt

Several studies have been performed for the design of the injector, of the superconducting linac and of the high-energy beam transport (HEBT) lines towards the 200 kW beam dump and the experimental areas NFS and S3 (see picture here opposite) .

  1. Conceptual design studies, beam dynamics simulations, design consolidation (2005-2009).
  2. Coordination of work packages for the low-energy (2007-2010) and high-energy (2010-2014) beam lines.
  3. First beam tests of the injector (2010-2012) at LPSC Grenoble (see picture here below) and at CEA Saclay.
  4. Preparation of the beam commissioning at GANIL (from 2014 on).


(up-right) SPIRAL-2 HEBT lines.
(down) The q/A=1/3 SPIRAL-2 injector at LPSC Grenoble:emittance measurement of an Argon 40 12+ beam (40kV, 150uA) 

LPSCemittLPSC


A few related IPNO publications...

Commissioning of the SPIRAL2 deuteron injector, Proc. IPAC 2013

Beam dump of SPIRAL2 : residual dose rate calculations and impact of the computational approaches, IEEE TNS 59 (2012) 1665-1671

SAFARI, an optimized beam stop device for high intensity beams at the SPIRAL2 facility, Proc. IPAC 2011

First beams produced by the SPIRAL2 injectors, Proc. LINAC 2010

Design of a high-energy beam stop for SPIRAL2, Proc. LINAC 2010

First A/Q=3 beams of Phoenix V2 on teh heavy ions LEBT of SPIRAL2, Proc. ECRIS 2010

HEBT lines for the SPIRAL2 facility : what to do with accelerated beams ?, Proc. HB 2010

SPIRAL2, Proc. SRF 2009

HEBT lines for the SPIRAL2 facility, Proc. HIAT 2009

Beam dynamics and error studies of the SPIRAL2 driver accelerator, Proc. LINAC 2008

Status of the construction of teh SPIRAL2 accelerator at GANIL, Proc. LINAC 2008

The SPIRAL2 project : construction progress & recent developments on the SC linac driver, Proc. SRF 2007

The high-intensity superconducting linac for the SPIRAL2 project at GANIL, Proc. LINAC 2006

Flat beams and application to the mass separation of radioactive beams, Proc. EPAC 2006

Beam dynamics studies for the SPIRAL2 project, Proc. EPAC 2006

Superconducting driver linac for the new SPIRAL2 RIB facility, Proc. EPAC 2006

Status report on the beam dynamics developments for the SPIRAL2 project, Proc. EPAC 2004

Beam dynamics studies in SPIRAL2 linac, Proc. PAC 2003


Contact : Jean-Luc BIARROTTE


 

IPN

Institut de Physique Nucléaire Orsay - 15 rue Georges CLEMENCEAU - 91406 ORSAY (FRANCE)
UMR 8608 - CNRS/IN2P3

Ce site est optimisé pour les navigateurs suivants Firefox, Chrome, Internet explore 9